Boxer Adhesives Vinyl Pool Liner Patch Repair Kit | 10

The mess-free, instant-bond solution for patching vinyl liners and inflatables without draining the pool.

Product Overview

The Boxer Adhesives Model #10 is a specialized "Peel & Stick" repair system designed to fix tears in vinyl pool liners and inflatables without the need for liquid glues or solvents. This kit features industrial-strength, self-adhesive vinyl patches that form an immediate, watertight seal on both dry and wet surfaces. The patches are completely clear, allowing them to blend invisibly into any liner pattern or pool float design. It is the ideal quick-fix tool for small punctures, pinholes, and tears where traditional solvent cement might be too messy or difficult to apply.

Key Features

• Mess-Free Application: Uses a high-tack self-adhesive backing, eliminating the need for sticky tubes of glue or daubers.

• Underwater Capable: Engineered to apply and stick directly underwater, so you never have to drain the pool to stop a leak.

• Invisible Repair: The crystal-clear vinyl material allows the original liner pattern or inflatable color to show through for a seamless look.

• Versatile Bonding: Effective on soft vinyl swimming pool liners as well as pool floats, rafts, waterbeds, and vinyl upholstery.

How to Use

1. Prep: Thoroughly clean the area surrounding the tear to remove algae, oils, or dirt, as the adhesive requires a clean surface to bond.

2. Cut: Using scissors, cut the patch to size, ensuring it overlaps the tear by at least 3/4 inch on all sides. Always round the corners to prevent peeling.

3. Peel: Carefully separate the paper backing from the clear vinyl patch, exposing the adhesive side.

4. Apply: Place the patch directly over the hole (underwater or dry) and press firmly from the center outwards to smooth out all water and air bubbles.

5. Cure: Do not disturb the patch for at least 30 minutes to allow the adhesive bond to set.

Product Specifications