Pentair Clamp Assembly | System 3 SD, SM & SS Series Filters | 24850-0200Z
- In stock, ready to ship
- Backordered: contact us for ETA
- SKU:
- 24850-0200Z
-
Poolaroo Promise
- Fast Shipping — Ships in 1–2 Business Days
- 30-Day Risk-Free Returns — We Pay Return Shipping, No Restocking Fees
- Powered By People Who Care - No Faceless Conglomerate
About This Item
The Pentair Clamp Assembly (24850-0200Z) is the OEM replacement clamp for the Sta-Rite System 3 SD Series D.E. Filters, System 3 Modular Media (SM Series) Filters, and System 3 SS Series Sand Filters. Each listing is for a single clamp — confirm the quantity your specific model requires before ordering.
⚠️ IMPORTANT: QUANTITY REQUIRED VARIES BY MODEL
The number of clamps required depends on your specific filter model. Model S7S50 and S7D75 require seven (7) clamps per unit; Model S8S70 and S8D110 require eight (8) clamps per unit. Order the correct quantity for a complete service. See the Fits Into table below for your model's requirement.
These clamps secure the filter tank sections together, maintaining a pressure-tight seal between the upper and lower tank halves during operation. A cracked, broken, or missing clamp compromises the structural integrity of the filter assembly and can result in a loss of system pressure or tank separation under load. Replace damaged clamps promptly and inspect all clamps as a set during routine filter service.
Specifications
| Pentair Part Number | 24850-0200Z |
| Part Name | Clamp Assembly |
| Quantity Included | 1 (Each) — order the quantity required for your model |
Fits Into
| Brand | Equipment Line | Model / Part Number | Notes |
| Pentair (formerly Sta-Rite) | System 3 D.E. Filter — System 3 SD Series | S7D75 | Requires 7 clamps per unit |
| Pentair (formerly Sta-Rite) | System 3 D.E. Filter — System 3 SD Series | S8D110 | Requires 8 clamps per unit |
| Pentair (formerly Sta-Rite) | System 3 Modular D.E. Filters — System 3 Modular D.E. | SMD | System 3 Modular D.E. Filters |
| Pentair (formerly Sta-Rite) | System 3 Modular Media Filter — System 3 | S7M120 | S7M120 requires 7 clamps; S8M150 requires 8 clamps |
| Pentair (formerly Sta-Rite) | System 3 Modular Media Filter — System 3 | S7M400 | S7M120 requires 7 clamps; S8M150 requires 8 clamps |
| Pentair (formerly Sta-Rite) | System 3 Modular Media Filter — System 3 | S8M150 | S7M120 requires 7 clamps; S8M150 requires 8 clamps |
| Pentair (formerly Sta-Rite) | System 3 Modular Media Filter — System 3 | S8M500 | S7M120 requires 7 clamps; S8M150 requires 8 clamps |
| Pentair (formerly Sta-Rite) | System 3 Sand Filter — System 3 | S7S50 | Model S7S50 uses seven clamps; Model S8S70 uses eight clamps |
| Pentair (formerly Sta-Rite) | System 3 Sand Filter — System 3 | S8S70 | Model S7S50 uses seven clamps; Model S8S70 uses eight clamps |
Compatibility is based on Pentair parts documentation and available OEM records. This is not an exhaustive list. For certainty, verify the part number in your equipment's manual or on the original part itself before ordering.
Pro Tip
When replacing a damaged clamp, inspect the entire set on your filter at the same time. Because all clamps share the same load around the tank seam, uneven wear or stress cracking often affects multiple clamps simultaneously. Replacing only the visibly broken clamp while leaving fatigued clamps in place can lead to a repeat failure under pressure. Count the clamps on your unit before ordering — seven for S7-series models, eight for S8-series models — and order the full set if any others show cracking, deformation, or discoloration.
